DisplayPort to HDMI Active Adapter (M/F)

Important! Your computer's Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer. BIOS Thunderbolt firmware Thunderbolt 3 controller drivers Thunderbolt 3 software The required updates will vary depending on your computer. For an up-to-date list of affected computers and instructions, visit http://thunderbolttechnology.net/updates. If your manufacturer isn't listed on the Thunderbolt website, contact your... Read more

Components Thunderbolt™ 3 is the latest version of the Thunderbolt standard for connecting computers and electronic devices. It is capable of the following: Total bandwidth up to 40 Gbps. (Data transfer speeds are dependent on the other features that you are using in your setup.) USB 3.1 Gen 2 support. 4K 60Hz video on one or two separate displays. 5K 60Hz video on a single display. A 10 GbE network connection between two Thunderbolt 3 compatible computers. Up to six devices daisy-chained from a single Thunderbolt 3 port. Alternate modes, such as DisplayPort Alternate Mode (DP alt mode). Bi-directional power delivery up to 100W (not all Thunderbolt 3 devices support power delivery). USB-C and Thunderbolt 3 Thunderbolt 3 uses the USB-C connector, but not all host connections, cables and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable or device. To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol:  USB-C devices do not include this symbol. Are DisplayPort devices able to be connected to Thunderbolt 3? Yes, the Thunderbolt 3 ports are fully compatible with DisplayPort devices and cables. Backwards compatibility If you use an adapter, Thunderbolt 3 host connection are compatible with Thunderbolt 1 and Thunderbolt 2 devices. Thunderbolt 3 devices are not backwards compatible with Thunderbolt 1 or Thunderbolt 2 host connections. For more information on Thunderbolt 3, please see our Thunderbolt 3 Information page. Thunderbolt 3 Products by... Read more

If you set your display to 4K @ 60Hz and connect a display to the DisplayPort output on the laptop dock, your display may flicker. This issue only affects certain monitors and is a result of an interoperability issue between the hardware used in the display and the dock. This issue is not specific to VisionTek docks. To resolve this issue, you may try any of the following: Connect a USB-C to DisplayPort cable from the USB-C Thunderbolt 3 port on the dock to the DisplayPort input on the display. (VisionTek USB 3.1 Type C to DisplayPort Adapter PN 900817) Connect a USB-C to HDMI 1.4 cable from the USB-C Thunderbolt 3 port on the dock to the HDMI input on the display. VisionTek USB 3.1 Type C to HDMI Adapter PN 900819) Disable MST (Multi Stream Transport) or DisplayPort 1.2 mode on your display and enable 4K @ 30Hz. Refer to your mandufacturer for... Read more

How do I check which version of Thunderbolt™ 3 software, firmware, and drivers I am running in Windows? To check which version of the Thunderbolt™ software, NVM firmware, and drivers you are running, do the following: Click Start. Type Thunderbolt and click on the search result. In the system tray, right-click the Thunderbolt™ icon. Click Settings > Details. Review the versions of the software package, NVM firmware, PD firmware, and drivers.  If you are not running the latest versions, navigate to your system manufacturer’s website and download the latest... Read more

Microsoft has made changes to their Windows 10 settings. This may cause a decrease in performance when using a Thunderbolt™ 3 SSD Enclosure. Below are steps you can take to resolve the performance issues until such time as Microsoft resolves any comapatibility issues. Device Manager > Disk Enable the write caching to bring the write performance back to normal levels. Please note: By making these changes, it is very important that you use the proper steps to disengage the SSD Enclosure to avoid data loss on the... Read more

The VT4800 does not require drivers, however, after connecting the docking station to your laptop's Thunderbolt™ 3 port, you may be required to allow the docking station to connect in the Thunderbolt™ 3 software found in your system tray. For full functionality, please ensure you have the latest Thunderbolt™ 3 software installed and up-to-date. Note: Thunderbolt™ 3 docking stations are not backwards compatible with Thunderbolt™ 2 or 1... Read more

The VT5000 does not require drivers, however, after connecting the docking station to your laptop's Thunderbolt™ 3 port, you may be required to allow the docking station to connect in the Thunderbolt™ 3 software found in your system tray. For full functionality, please ensure you have the latest Thunderbolt™ 3 software installed and up-to-date. Note: Thunderbolt™ 3 docking stations are not backwards compatible with Thunderbolt™ 2 or 1... Read more

When first connecting a Thunderbolt 3 device, the device must first be authenticated through Intel's Thunderbolt 3 software. To do so you can use the below instructions as a guide: After connecting a Thunderbolt 3 device the first thing that you should see (assuming that the system NVM, BIOS, drivers, etc are up to date and compatible) is an automatic notification above the system tray notifying you that a new device has been attached. You will want to click OK: After clicking OK, you may get a Windows User Account Control (UAC) popup asking if you "want to allow this app to make changes to your PC?". Click Yes: After clicking yes you should see a windows like this appear which is where you will approve the Thunderbolt 3 device that was just attached: Click on the drop down menu where it says "Do Not Connect" and select "Always Connect". Then click OK: To view and manage the approved devices you can find the program sitting in the system tray. You may need to click the caret (up arrow icon) to show all of the running programs then right click on the Thunderbolt icon it and select Manage Approved Devices: You may again get a Windows UAC prompt, click yes. After clicking yes the below window will open and you can see any approved devices and remove them if you... Read more