VisionTek Radeon™ 5450 1GB DDR3 (DVI-I, HDMI, VGA)

The VisionTek Radeon™ HD 5450 1GB PCIe 2.1 x16 Graphics Card offers value features and functionality with complete DirectX 11 support. The HD 5450 enables a seamless PC experience with amazing image quality.

Graphics Engine: Radeon 5450
Memory: 1GB DDR3
Multi-monitor support: HDMI, DVI, VGA*
DirectX® Support: 11
Warranty: 3 Year Limited

$64.99

Availability: In stock

SKU

900860

Details

The VisionTek Radeon™ HD 5450 1GB PCIe 2.1 x16 Graphics Card offers value features and functionality with complete DirectX 11 support. Designed to deliver a feature laden gaming/computing experience, Radeon™ HD 5450 enables a seamless HD gaming experience with amazing image quality.

Microsoft DirectX® 11 Support
The VisionTek Radeon HD 5450 Series GPUs fully support Microsoft DirectX® 11, enabling the following:

Tessellation is now available to PC developers for real-time rendering with ultra-realistic characters and an incredible level of detail with 3D images.
HDR Texture compression delivers an intense level visual detail without increasing graphics memory footprint with efficiency and incredible image quality.
Multi-threading support for DirectX® 11 accelerates rendering by leveraging all the CPU cores to enable overall faster gaming performance.
DirectCompute improves PC performance by taking on some or all of a DirectX 11-enabled application’s processing load, freeing up the computer’s main processor to take on additional tasks.

Dolby® TrueHD and DTSHD Master Audio™ Support
Support of content protected, high bandwidth, 7.1 channels of surround sound over HDMI.

Avivo™ Technology Enhanced Unified Video Decoder 2 (UVD 2)
Watch HD content at full 1080p display resolution and beyond and enjoy a more feature rich experience with enhanced Unified Video Decoder 2 (UVD 2). Enhanced UVD 2 supports a hardware acceleration decode of dual 1080p HD video streams.

Specifications

Memory: 1GB DDR3
Multi-monitor support: HDMI, DVI, VGA*
PCIe 2.0: Supported
Processing power (single precision): 104 GigaFLOPS
Polygon throughput: 650M polygons/sec
Data fetch rate (32-bit): up to 20.8 billion fetches/sec
Texel fill rate (bilinear filtered): up to 5.2 Gigatexels/sec
Pixel fill rate: up to 2.6 Gigapixels/sec
Anti-aliased pixel fill rate: up to 10.4 Gigasamples/sec
Max board power: 19.4 watts

System Requirements

PCI Express® based PC is required with one X16 lane graphics slot available on the motherboard
250 Watt or greater power supply recommended**
Minimum 1GB of system memory
Installation software requires CD-ROM drive
DVD playback requires DVD drive

Warranty: 3 Year Limited with Registration

Drivers for this card may be found here: AMD.com

*HDMI video and audio may require adapter, Dual DVI and Dual VGA configurations require an adapter that is sold separately.

**Certified power supplies are recommended. Refer tohttp://ati.amd.com/certifiedPSU for a list of certified products.

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Latest News

VisionTek Launches the VT4900 Triple 4K Display & KVM Docking Station

VisionTek Introduces the VT2000 Triple Display USB-C Docking Station

VisionTek Launches the VT4800 Dual Display Thunderbolt 3 and USB-C Hybrid Docking Station Supporting up to 8K Resolution and Power Delivery

VisionTek Launches the VT4500 Dual 4K USB Docking Station with Power Delivery

VisionTek Launches the XT USB 3.0 Pocket SSD with Capacities up to 1TB

VisionTek Launches VT70 USB 3.0 to DisplayPort Adapter

VisionTek Launches Radeon VII

0 Latest FAQ

My Thunderbolt 3 Device isn't functioning properly!

Important! Your computer's Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer. BIOS Thunderbolt firmware Thunderbolt 3 controller drivers Thunderbolt 3 software The required updates will vary depending on your computer. For an up-to-date list of affected computers and instructions, visit http://thunderbolttechnology.net/updates. If your manufacturer isn't listed on the Thunderbolt website, contact your... Read more

What is Thunderbolt 3?

Components Thunderbolt™ 3 is the latest version of the Thunderbolt standard for connecting computers and electronic devices. It is capable of the following: Total bandwidth up to 40 Gbps. (Data transfer speeds are dependent on the other features that you are using in your setup.) USB 3.1 Gen 2 support. 4K 60Hz video on one or two separate displays. 5K 60Hz video on a single display. A 10 GbE network connection between two Thunderbolt 3 compatible computers. Up to six devices daisy-chained from a single Thunderbolt 3 port. Alternate modes, such as DisplayPort Alternate Mode (DP alt mode). Bi-directional power delivery up to 100W (not all Thunderbolt 3 devices support power delivery). USB-C and Thunderbolt 3 Thunderbolt 3 uses the USB-C connector, but not all host connections, cables and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable or device. To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol: USB-C devices do not include this symbol. Are DisplayPort devices able to be connected to Thunderbolt 3? Yes, the Thunderbolt 3 ports are fully compatible with DisplayPort devices and cables. Backwards compatibility If you use an adapter, Thunderbolt 3 host connection are compatible with Thunderbolt 1 and Thunderbolt 2 devices. Thunderbolt 3 devices are not backwards compatible with Thunderbolt 1 or Thunderbolt 2 host connections. For more information on Thunderbolt 3, please see our Thunderbolt 3 Information page. Thunderbolt 3 Products by... Read more

What do I do if my display flickers when I use it with my laptop dock?

If you set your display to 4K @ 60Hz and connect a display to the DisplayPort output on the laptop dock, your display may flicker. This issue only affects certain monitors and is a result of an interoperability issue between the hardware used in the display and the dock. This issue is not specific to VisionTek docks. To resolve this issue, you may try any of the following: Connect a USB-C to DisplayPort cable from the USB-C Thunderbolt 3 port on the dock to the DisplayPort input on the display. (VisionTek USB 3.1 Type C to DisplayPort Adapter PN 900817) Connect a USB-C to HDMI 1.4 cable from the USB-C Thunderbolt 3 port on the dock to the HDMI input on the display. VisionTek USB 3.1 Type C to HDMI Adapter PN 900819) Disable MST (Multi Stream Transport) or DisplayPort 1.2 mode on your display and enable 4K @ 30Hz. Refer to your mandufacturer for... Read more

How do I check which version of Thunderbolt 3 software, firmware and drivers I am running in Windows?

How do I check which version of Thunderbolt™ 3 software, firmware, and drivers I am running in Windows? To check which version of the Thunderbolt™ software, NVM firmware, and drivers you are running, do the following: Click Start. Type Thunderbolt and click on the search result. In the system tray, right-click the Thunderbolt™ icon. Click Settings > Details. Review the versions of the software package, NVM firmware, PD firmware, and drivers. If you are not running the latest versions, navigate to your system manufacturer’s website and download the latest... Read more

My Windows 10 system isn't performing as expected with my TB3 SSD enclosure

Microsoft has made changes to their Windows 10 settings. This may cause a decrease in performance when using a Thunderbolt™ 3 SSD Enclosure. Below are steps you can take to resolve the performance issues until such time as Microsoft resolves any comapatibility issues. Device Manager > Disk Enable the write caching to bring the write performance back to normal levels. Please note: By making these changes, it is very important that you use the proper steps to disengage the SSD Enclosure to avoid data loss on the... Read more

I have connected my VT4800 docking station to my Thunderbolt port but it does not seem to be working, are there required drivers?

The VT4800 does not require drivers, however, after connecting the docking station to your laptop's Thunderbolt™ 3 port, you may be required to allow the docking station to connect in the Thunderbolt™ 3 software found in your system tray. For full functionality, please ensure you have the latest Thunderbolt™ 3 software installed and up-to-date. Note: Thunderbolt™ 3 docking stations are not backwards compatible with Thunderbolt™ 2 or 1... Read more

I have connected VT5000 to my Thunderbolt port but it does not seem to be working, are there required drivers?

The VT5000 does not require drivers, however, after connecting the docking station to your laptop's Thunderbolt™ 3 port, you may be required to allow the docking station to connect in the Thunderbolt™ 3 software found in your system tray. For full functionality, please ensure you have the latest Thunderbolt™ 3 software installed and up-to-date. Note: Thunderbolt™ 3 docking stations are not backwards compatible with Thunderbolt™ 2 or 1... Read more

How do I authenticate a newly attached Thunderbolt 3 device?

When first connecting a Thunderbolt 3 device, the device must first be authenticated through Intel's Thunderbolt 3 software. To do so you can use the below instructions as a guide: After connecting a Thunderbolt 3 device the first thing that you should see (assuming that the system NVM, BIOS, drivers, etc are up to date and compatible) is an automatic notification above the system tray notifying you that a new device has been attached. You will want to click OK: After clicking OK, you may get a Windows User Account Control (UAC) popup asking if you "want to allow this app to make changes to your PC?". Click Yes: After clicking yes you should see a windows like this appear which is where you will approve the Thunderbolt 3 device that was just attached: Click on the drop down menu where it says "Do Not Connect" and select "Always Connect". Then click OK: To view and manage the approved devices you can find the program sitting in the system tray. You may need to click the caret (up arrow icon) to show all of the running programs then right click on the Thunderbolt icon it and select Manage Approved Devices: You may again get a Windows UAC prompt, click yes. After clicking yes the below window will open and you can see any approved devices and remove them if you... Read more

For California Residents Only:

⚠WARNING: Cancer and Reproductive harm. For more information, go to www.p65warnings.ca.gov

* Please, Note that Proposition 65 may be best defined as a “Right To Know” law in California and Prop 65 warning labels are not an indication that a product is violating safety standards or regulations. The Prop 65 warning label does not mean our products inevitably cause cancer or reproductive harm. We do not consider our products harmful when used as intended. However, it is a necessary precaution to provide the warning because of this California law.